Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 12 (click to view)
Installation
Mounting accessories included
1 Coupling ring 8 metal screws 2,9 x 16 (if the hood is used in the extractor version) or the top of the cabinet (if the hood is used the hood in the recirculation version). � Remove the frame by pushing the two side � release keys (5-6). Fix the coupling ring on the exhaust hole of the hood and make connection with the bottom end of the hose (7a-b), seal with tape. Attention: The hose is not supplied and must be purchased separately. Prepare the electrical connection (8). Fit the hood into the opening and fix securely to the cabinet with 8 screws (9). Fit the frame (10 - snap into place).
5
Fixing the hood into a cabinet
This cooker hood is designed to be fitted to a cabinet or similar support. � Create an opening in the bottom of the cabinet to insert the cooker hood (1-2). � Make a hole on the top of the cabinet to fit the hose and for the electrical cable (3). � Fit a hose (4) long enough to reach the outside
2
