Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
Text excerpt from page 18 (click to view)
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window.
Using the timer to measure short periods of time (�Minute Minder�). Minute
1 Important! the Timer!the cooking zones should None of be set with
1. Touch the "On/Off" sensor field for around two seconds. The digital display _ flashes. 2. Touch the TIMER W sensor field to activate the Timer function. 3. Using the + or - sensor fields, set the desired length of time (for example, 20 minutes). The Timer begins to run after a few seconds, and indicates the time remaining. When the set time has elapsed, an audible signal is sounded. 4. Touch the TIMER W sensor field, to switch off the signal.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1. Select the desired cooking zone using the cooking zone buttons. 2. Touch the + and - buttons simultaneously: The cooking zone and timer will switch off.
Switching off the timer - leaving the cooking zone active
1. Select the desired cooking zone using the cooking zone buttons. 2. Touch the �Timer� button again. 3. Touch the + and - buttons simultaneously: � Only the timer will switch off. � The cooking zone will stay on.