Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 15 (click to view)
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window.
Using the timer to measure short periods of time (�Minute Minder�).
1 Important! the Timer!the cooking zones should None of be set with
1. Touch the "On/Off" sensor field for around two seconds. The digital display _ flashes. 2. Touch the TIMER W sensor field to activate the Timer function. 3. Using the + or - sensor fields, set the desired length of time (for example, 20 minutes). The Timer begins to run after a few seconds, and indicates the time remaining. When the set time has elapsed, an audible signal is sounded. 4. Touch the TIMER W sensor field, to switch off the signal.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1. Select the desired cooking zone using the cooking zone buttons. 2. Touch the + and - buttons simultaneously: The cooking zone and timer will switch off.
Switching off the timer - leaving the cooking zone active
1. Select the desired cooking zone using the cooking zone buttons. 2. Touch the �Timer� button again. 3. Touch the + and - buttons simultaneously: � Only the timer will switch off. � The cooking zone will stay on.
