|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
 ;
Exactly as described, the full user-manual (145 pages). Perfect.
Select the �Soundcheck� menu. The soundcheck is started immediately. With the transmitter, walk up and down the transmission area. Press the button on the receiver to terminate the soundcheck and to display the result of the soundcheck. The level displays �RF� and �AF� will indicate the lowest RF and the highest AF level of the received transmitter. Optimize the RF level by repositioning the receiving antennas. The audio level should be as high as possible (max. 0 dB) without the level display for audio signal �AF� showing full deflection (see the section �Adjusting the sensitivity� in the operating manual of the transmitter). If both receiving antennas are connected and aligned, the diversity displays I and II appear on the display panel. If no transmitter is being received, the �MUTE� display appears on the display panel. To do another soundcheck (e.g. with an improved antenna arrangement, another transmitter position or a new transmitter sensitivity), press the button.
Selecting the standard display Display
Via the �Display� menu, you can select the standard display: Selectable standard display �Main� (standard display) Contents of the display
�Frequency� (display of the frequency)
�Bank/Channel� (display of the channel bank and channel number)
�Name� (display of the freely selectable name)
�AF meter� (graphic display of the AF level)
�Second RF� (display of the RF levels of the two diversity sections)
22
|
|
|
> |
|
