|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
 ;
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
;
Fast service, document is OK. Thanks! Searched for it long time.
;
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
;
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
<Multiple Exposures
3 Take the picture.the multiple exposures, the film advances to After you take all
s
the next frame automatically and the multiple-exposure setting is canceled.
If you shoot multiple exposures on the first few or last few frames of a roll, the multiple exposures might not be precisely aligned due to the film curling. � During multiple-exposure shooting, the <>> arrow next to the <<> icon on the LCD panel will blink. � To cancel multiple exposures before shooting, set the number of multiple exposures to � �. � To cancel multiple exposures after shooting, follow steps 1 and 2 to set the number of multiple exposures to blank.
D Setting the ISO Film Speed
If the film is not DX-coded or if you want to set a different film speed, load the film in the camera and set the film speed manually as follows. The settable film speed range is ISO 6 to 6400.
1 Move the <>> arrow to the <D> icon.
� Look at the LCD panel and press
the <\> button to move the arrow. (�) s The current film speed is displayed.
2 Set the desired dial tospeed. film film � Turn the <l> set the
speed.
The manually-set film speed will be canceled if the film is taken out and DX-coded film is loaded.
42
|
|
|
> |
|
