This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 14 (click to view)
When removing the control panel stand cover
1. Insert the head of a flat-tip screwdriver in the gap under the mark (O). 2. Push the bottom tab of the cover up to lift the cover. 3. Perform the same procedures as 1 and 2 above for the other gap. 4. Pull the cover up diagonally. � Performing this procedure with the allen key or a Phillips screwdriver could damage the unit. 1 2 Flat-tip screwdriver (Not included in the standard configuration) Gap
2
4 Raising the backrest to the
upright position
1. Insert the power plug into the power outlet. 2. Confirm the key lock is set to the �open� position. 3. Confirm the power switch is set to the �on� position. 4. Press the button on the control panel twice. The backrest will rise to the upright position automatically.