The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 6 (click to view)
Regulation and Control
I Freezer control knob
Setting the knob at 1 will give you a minimum freezing temperature. Setting 7 will give you the maximum freezing temperature. For normal use set the freezer at a middle setting (The exact setting will depend on your usage of the freezer).
4 Fast Freeze
This feature is designed to help you freeze your food more quickly. It is best to press the fast freeze button before going shopping (preferably 3 houres in advance) in order to have the freezer in an optimal state to put your food in. If you haven�t pressed the button prior to purchasing your food you can of course put your new purchases in, but it will take longer for the freezer to cool down. (If you put a lot of fresh food into your freezer you could cause the temperature alarm to go on. For further information see sention on temperature alarm).
2 The door alarm
If either of the doors is left open for a prolonged period of time the door alarm will start to beeb and a red flashing light will go on. Pressing the alarm button will switch the buzzer off and the light will stop flashing, but remain red. If you simply shut the doors, this will also switch off the door alarm buzzer and the light automatically.
5 On/Off button
To make the product work press the ON/OFF button continuosly for 3 seconds. To switch the product off press the button continuously for 3 seconds. When the product has been plugged in and the button pressed for the 3 seconds, the button will light up in green. If the ON/OFF button is green the freezer knob and fridge knob will also be lit up.
3 Temperature alarm
If the internal temperature has risen significantly the temperature alarm will sound and the light will start to flash. To switch the alarm off simply press the temperature alarm button. This will stop the buzzer and the red light will stop blinking and remain red. The temperature alarm may go on because: a.- The doors have been left open. b.- There has been a power failure. c.- More than the recomended amount of food has been put in at one time. d.- You need to set the temperature controls to a colder position. If the alarm goes on constantly you should contact you TECHNICAL OFICIAL SERVICE.
6 Fridge control
Setting the knob to the standby position when the freezer is working, but the fridge if not being used, (for example when you go on holiday), will help you to reduce energy consumption. The fridge door however must be kept closed. By turning the knob clockwise you will progressively cool down the fridge. Position 5 is the coldest setting possible. If neither the fridge nor the freezer are being used (i.e. The appliance switched off), both doors should be left open. This will help to avoid any possible smells caused by high levels of humidity.
