|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
Adjusting
(on some
the crisper
cover
track
models)
For your convenience, one crisper is larger than the other, and your crisper cover has an adjustable track so you can switch positions of the crispers. This allows you to store celery and other longer items in a crisper. You can adjust the cover track with the cover in the refrigerator by removing the crispers and the cover insert. To remove the center track: 1. Push up cover insert from bottom, then slide out with both hands. 2. Gently pull up on front end of track. 3. Pull rear end of track out of opening in cover.
To replace the center track: 1. Insert rear end of track (with hole) into opening in cover. 2. Lower front end of track into slot. 3. Make sure rear end of track snaps into place on underside of cover.
Adjusting
(on some
the freezer
shelf
models)
Adjust the freezer shelf to match the way you use your freezer. To remove the shelf: 1. Lifl entire shelf slightly. 2. Move shelf all the way to one side. 3. Tilt other side up and out of shelf support cups. 4. Pull shelf up and out.
Step 1 To replace the shelf: 1. Tilt the shelf and insert into freezer compartment. 2. Insert one end of the shelf all the way into the center of the shelf support cups. 3. Lower other end of shelf and insert into the shelf support cups. 4. Lower shelf into place. NOTE: The shelf should lower slightly and lock into place. If the shelf does not appear sturdy, make sure both ends of the shelf are inserted into the shelf support cups.
Step 4
11
|
|
|
> |
|
