|
There are currently no product reviews.
 ;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
Installing
it properly
1. Allow 1/2inch (1.25 cm) space on each
side and at the top of the refrigerator for ease of installation. 2. If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider. 3. The refrigerator can be flush against the back wall.
Leveling
it
Right to raise;
Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below. 1. Remove base grille. (See page 12.) 2. To raise front, turn screw clockwise. 3. To lower front, turn screw counterclockwise. 4. Check with level. 5. Replace base grille. (See page 12.)
left to lower
screwdriver
6
|
