|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
N
C
INSTALLATION Technical information for the installer
Before installing the hob, remove the protective film. This cooktop can be fitted into a work surface 20 to 40 mm thick (ETN 4240) or 30 to 40 mm thick (ETK 4240) and 600 mm deep. To fit the hob into the unit make an opening of the dimensions given in the figure, remembering that: - inside the unit there must be a space of at least 30 mm between the bottom of the hob and the top of an appliance or bracket. - any wall to the side and above the hob must be at least 50 mm away. - the wall behind the hob must be at least 50 mm away. - when there is a wall unit or hood above the hob there must be at least 650 mm between the hob and the unit or hood. - the coatings of the walls of the unit or appliances near the hob must be heat resistant (�Y� protection against heating in compliance with standards EN 60335-2 6). Do not install the hob near inflammable materials (e.g. curtains).
450 mm
ETN 4240 x= 30
650 mm
ETK 4240 45
N.B.: All the dimensions are in mm
25
M
Y
|
|
|
> |
|
