|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
Changing the light bulb...
WARNING:
To avoid possible electrical shock, first unplug freezer or turn off electricity leading to freezer at the main power supply.
I. Remove the light shield from the side of the control panel. Depress the back of the shield to release the tabs, then pull away. 2 Replace bulb with a do-watt appliance bulb. 3. Replace the light shield Insert the shield tabs in the slots, then press the shield to snap into place. 4. Plug in power cord or switch on electricity
Removing
the freezer basket.. .
For proper air movement, keep the freezer basket in place when the freezer is operating. To remove the basket: l Slide out to the stop. l Lift the front to clear the stop. l Slide out the rest of the way. To replace the basket: l Place basket on the slides. l Make sure the wire stops clear the front of theslides. l Slide basket in. _ sr.5. .,_iWl. _ .: .l,cl.: ..,, ~ ,,,.&,., a,. ,-
..
To lock or unlock the freezer you must hold the key in the lock while turning The lock is spring loaded so the key cannot be left in the lock If the key is lost, contact your WHIRLPOOL dealer for a replacement Always grve the complete model and serial number of your freezer when requesting a replacement key
The key eject lock...
can help entrapment. reduce the hazard of child
The signal light...
automatically warns of any unexpected power failure.
Signal /
light
l l l
If the signal light is not glowing, immediately for power interruption, for an unplugged power cord, for a burned out signal light.
check:
To replace burned out signal light: I. Unplug power cord from outlet. 2. Open the freezer door 3. Unplug burned out light and replace with one of same wattage and size. Signal light can be ordered from vour WHIRLPOOL dealer, Part No.
6
|
|
|
> |
|
