|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good quality instructions manual. Very useful to me. Quick and excellent service from Owner-Manuals... Thanks !!!
;
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
Changing the light bulb...
WARNING:
To avoid possible electrical shock, first unplug freezer or turn off electricity leading to freezer at the main power supply.
I. Remove the light shield from the side of the control panel. Depress the back of the shield to release the tabs, then pull away. 2 Replace bulb with a do-watt appliance bulb. 3. Replace the light shield Insert the shield tabs in the slots, then press the shield to snap into place. 4. Plug in power cord or switch on electricity
Removing
the freezer basket.. .
For proper air movement, keep the freezer basket in place when the freezer is operating. To remove the basket: l Slide out to the stop. l Lift the front to clear the stop. l Slide out the rest of the way. To replace the basket: l Place basket on the slides. l Make sure the wire stops clear the front of theslides. l Slide basket in. _ sr.5. .,_iWl. _ .: .l,cl.: ..,, ~ ,,,.&,., a,. ,-
..
To lock or unlock the freezer you must hold the key in the lock while turning The lock is spring loaded so the key cannot be left in the lock If the key is lost, contact your WHIRLPOOL dealer for a replacement Always grve the complete model and serial number of your freezer when requesting a replacement key
The key eject lock...
can help entrapment. reduce the hazard of child
The signal light...
automatically warns of any unexpected power failure.
Signal /
light
l l l
If the signal light is not glowing, immediately for power interruption, for an unplugged power cord, for a burned out signal light.
check:
To replace burned out signal light: I. Unplug power cord from outlet. 2. Open the freezer door 3. Unplug burned out light and replace with one of same wattage and size. Signal light can be ordered from vour WHIRLPOOL dealer, Part No.
6
|
|
|
> |
|
