Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 10 (click to view)
Use
Control panel
EW 1063 W
12 3
1 Programme guide 2 Drying indicator light
This light illuminates when the machine is drying.
4 5 67
8
9
If this button is not activated, the washing programmes will end with a spin. The Rinse Hold button must not be depressed when using NON-STOP operation (automatic washing and drying).
3 Drying time selector dial
Graduated up to 120 mins for cottons (light blue section) and synthetics (yellow section), this dial allows you to select the desired drying time according to the type and quantity of laundry and the required degree of dryness. Turn the dial clockwise only. Cooling phase To allow the laundry to cool down, a cooling phase starts automatically 10 minutes before the end of drying and this phase must in no circumstances be reduced or interrupted.
6 On/Off button
By depressing this button the machine starts operating. When depressed again, the machine stops and is switched off.
7 Mains-on light
This light illuminates when the machine starts working and goes out when the ON/OFF button is released.
8 Temperature selector dial
Turn this dial clockwise or anti-clockwise to select the required temperature.
4 Super Rinse button
By depressing this button on programmes for cottons and linens the machine will perform an extra rinse (4 instead of 3). This is recommended for people who are allergic to detergents and in areas where the water is very soft.
9 Programme selector dial
Turn the dial clockwise to select the required wash and drying programme. Before setting the dial to any position the machine must be switched off by depressing the ON/OFF button again.
5 Rinse Hold button
Press this button to make the machine stop with water in the drum after the cotton, synthetic or delicate wash cycles. This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and spin, or select the drain programme �Q� .
