Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 13 (click to view)
Operating sequence Automatic washing plus drying (NON-STOP operation)
This option is only possible for cottons and synthetics. Maximum load: � cotton, linen 2.5 kg � synthetics 2.0 kg Important: Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash dispenser and start up the machine.
P0881
4 Select the drying time
Turn the selector knob clockwise to the required time (red or blue sector, depending on the type of fabric).
5 Select the temperature
9 5°
Turn the selector knob to the required temperature setting.
Place the laundry in the drum
Open the door by pressing the button and place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
6 Select the programme and start it
1
P0004
P1011
P0080
2 Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out P0910 an extra prewash, pour detergent into the appropriate compartment marked .
Turn the programme selector clockwise to the required wash programme and press the start/stop button the operating light and the door lock light come on and the machine starts to operate.
7 At the end of the programme
The machine stops automatically. It is normal to have to wait for about 2 minutes before being able to open the door to allow the safety lock to release. The door cannot be opened until the door lock light on the control panel goes out. Press the start/stop button ing pilot light goes out. Remove the laundry. Turn the drum by hand to make sure it is completely empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites. Release any buttons which have been pressed. Turn the water tap off and unplug the machine. Leave the door ajar to air the machine. again and the operat-
3 Measure out the additives
If required, pour fabric softener into the compartment marked and the bleaching agent in the compartment marked without exceeding the «MAX» mark.
