Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Text excerpt from page 18 (click to view)
Operating sequence
Washing only
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine on
: the mains-on light comes on.
To switch the machine on, press the ON/OFF button
---
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. If the programme selector dial is on the RESET O position, three flashing dashes will be displayed. If the programme selector dial is positioned on a wash programme, the duration of that programme will be displayed.
5. Select the desired programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
A
P0004
4 0 ° E
° 0 ° 0
95° E° 60
G
F
D
B
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash or the soak programme �A�, pour detergent into the appropriate compartment marked .
° 0
30° ° 4 6
C 3 4
The display shows the duration of the programme.
6. Select the spin speed or option
Depress the spin speed button to choose the required speed or option : the corresponding light comes on.
1200 900 700 500
3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
