This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
It was easy done, and I got exactly what I was looking for.
Text excerpt from page 13 (click to view)
Operating sequence
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run the cotton cycle 60°E, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Select the desired programme
Turn the programme selector dial to the desired position.
60E 90
O
S PO OE
0 I C
0
T
ON
3
A IL
4
C W
E T O H T
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. The light corresponding to the max spin speed for the selected programme illuminates and the light of the Start/Pause button starts to flash.
4 3 0
5. Select the required option(s)
The light corresponding to the depressed button illuminates. When selecting the Rinse Hold option the water of the last rinse is not emptied out, to prevent the fabrics from creasing.
P0004
Prewash
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the �Prewash� or a �Stain phase�, pour detergent into the appropriate compartment marked .
Rinse Hold
Quick Wash
6. Reduce eventually the spin speed
Press the Spin Reduction button repeatedly to reduce the spin speed. The relevant light illuminates. EW 770 F
750 650 Spin Reduction 500 in Progress End Door
3. Measure out the additive
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
