|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
PLAYING A DISC
PLAYING A DVD VIDEO OR AN AUDIO CD
DVD Getting started
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.) Notes
¡When the DVD mode has been switched to the TV
CD
1 Press the POWER button.
¡The power will turn on.
mode, the DVD mode shut down first and then TV picture and sound appears in about 4 seconds. Similarly, when the POWER button is pressed off in the DVD mode, this mode shut down first and then the set�s power is turned off. ¡A �prohibited icon� may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.
¡If a disc is dirty or has scratches, the pictures may
2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3 Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct
appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. DVDs that use some titles for playback ¡With program signals, playback may start from the second title, or it may skip these titles.
recess, with the label side up.
USING THE DVD MENUS
DVD 4 Press the PLAY button.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.
¡When you play back the DVD which a title menu is
Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.
1 Press the DISC MENU button.
¡The DVD menu will appear.
recorded, the menu may appear on the screen. In this case, refer to �USING THE TITLE MENU�.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
5 Press the STOP button to stop play.
setting, and then press the ENTER button.
3 Playback will start from the selected title.
� 21 �
0C28
EN
|
|
|
> |
|
