|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
RECORDING
Make sure ... � The unit is turned on. � Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: � This unit will ONLY record and view the same channel. � This unit cannot record the contents from the built-in DVD.
NORMAL RECORDING
TV/VCR
You can ONLY watch the same TV program that is being recorded.
SKIPPING UNWANTED SCENES DURING RECORDING
TV/VCR
Press the PAUSE button to temporarily stop recording. Press the PAUSE or RECORD button to resume recording. NOTES: � After 5 minutes, the unit will automatically switch to Recording mode to prevent tape damage. � If �CLOSED CAPTION (ON)� is selected, the OnScreen Display will appear for 5 seconds, then disappear.
SP PAUSE
1
Select the channel to be recorded
Press the number buttons on the CH 10 remote control or the CHANNEL button K or L. Remember: If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
SP
3
Begin recording
REC
Press the RECORD button.
SP
4
Stop recording
Press the STOP button when recording is completed.
- 30 -
EN
1C29
|
|
 |
> |
|