Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 19 (click to view)
7. Select the required options
The light corresponding to the depressed button illuminates.
The display will show the duration of the programme or the selected delay.
10. Changing the options when the programme has started
Prelavado
Lavado Rapido Aclarado Extra
Ciclo Noche
Manchas
If you wish to change some options after the programme has started, first set the machine to PAUSE by pressing the �Inicio/Pausa� button. Now, it is possible the options, the spin speed and the washing temperature, if they have not been executed by the appliance.
8. Select the DELAY TIME
To delay starting of the programme, press the DELAY start button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.
11. Interrupting a programme
Depress the �Inicio/Pausa� button to interrupt a programme which is running, the corresponding light starts to flash. Depress the same button again to restart the programme.
12. Cancelling a programme
Turn the selector dial to PARO to cancel a programme which is running. Now you can select a new programme. The new programme will start from the begging, keeping the water in the drum.
Inicio Diferido
9. Start the programme
To start the selected programme, press the �Inicio/Pausa� button; the corresponding light stops flashing, and only the light relevant to the phase that is in progress will remain lit.
13. Opening the door after the programme has started
First set the machine to PAUSE by pressing the �Inicio/Pausa� button. If the door does not open (door locked light lit), this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. If the door locked light is on and you cannot open the door but you need to open you have to switch the machine off turning the selector dial to PARO. After about 3 minutes the door loked light goes off and the door can be opened (pay attention to the water level and temperature). To restart the programme turn the dial to the previous programme repeating the options previously selected and press �Inicio/Pausa� button.
Inicio/ Pausa
If you have chosen a delayed start, the washing machine will begin the countdown. During this period it is possible to load other laundry: � depress �Inicio/Pausa� button; � load the laundry; � close the door and depress �Inicio/Pausa� button again. 45
