5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 14 (click to view)
3. Measure out the additive
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
If required, pour fabric softener into the compartment marked without exceeding the «MAX» mark.
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
C0065
4. Select the temperature
Turn the dial to the required setting.
90
P0004
M0045S
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the programme with prewash, pour detergent into the appropriate compartment marked .
5. Depress the Spin Speed reduction if required. 6. Select the degree of soiling, if required.
