|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
I
FAA23051-R.3248.A
You have the option to either leave the film leader in the camera or not by rewriting the data on the EEPROM memory chip. If you select to leave film leader, the film rewind motor stops immediately after the film detection switch turns from OFF to ON. Film leader leaves when rewinding film when the frame counter shows less than 1 (frame counter switch is ON) disregarding EPROM data. If you turn film rewind lever (R2) alone, an LED indicator (alert LED) blinks and alert at 8Hz.
(7) Shooting speed (Average values when using 36-exposure with fresh batteries and the shutter speed of 1/250 sec. or faster at room temperature (20°C) .
AF-c MF � b
MB-20 MB-21 MB-20 MB-21
CH 4.0 5.7 4.0 5.7
(frame/sec.) CL Cs 3.3 0.8 3.4 2.2 2.9 1.0 0.8 1.0
Shooting speed is not definite when setting in AF-S mode.
�M18�
 $4.99 F4 NIKON
Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
