Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 27 (click to view)
Operating Instructions
Starting a dishwashing cycle
0 1. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate. 2. Turn on the tap fully. 3. Press the ON/OFF button. The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated. 4. Press the relevant button for the cycle required (see �Programme Table�). The cycle display will become illuminated. 5. Close the dishwasher door. The dishwashing cycle will begin.
3
If an acoustic error message can be heard after the cycle has begun, please read the section �What to do if ...�.
Changing/interrupting/cancelling a dishwashing cycle
3
Only change or interrupt a dishwashing cycle that is in progress if it is absolutely necessary. After the appliance has been closed again, the air that has entered will be heated significantly and expand. As a result, water may collect in the base of the appliance and trigger the antiflood system. Changing a dishwashing cycle
3
If you would like to change the dishwashing cycle before closing the dishwasher door, briefly press the button for the new dishwashing cycle. If you would like to change the dishwashing cycle after the cycle has commenced, proceed as follows:
Hot steam may escape when the dishwasher door is opened. There is a risk of scalding! Carefully open the door of the dishwasher. 0 1. Open the door of the dishwasher. The dishwashing cycle will stop. 2. Press the button for the new dishwashing cycle and hold it down. First, the indicator for the dishwashing cycle that is currently running will flash. After several seconds only the indicator for the new dishwashing cycle will be flashing. 3. Release the cycle button. 27
