Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Good copy and great customer service! There was some confusion with my order and it was resolved promptly!
Text excerpt from page 15 (click to view)
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60° C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door by pulling the handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
4. Select the required programme
Turn the programme selector to the required programme.
P0004
2. Measure the detergent
Pull out the dispenser drawer until it stops. Measure the required amount of detergent, pour it into the main wash compartment and into the compartment marked has been chosen). (if PRE-WASH option
5. Select the spin speed or option .
Turn the spin selector to the required position.
R0055
3. Measure the fabric softener and/or bleach
If required, pour fabric softener into the compartment marked and bleach into the compartment marked (the amount used must not exceed the "MAX" mark in the drawer). Close the drawer gently.
