|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was having a hard time finding the problem with this Mackie 1604 unit. I didn't have a schematic. Went looking on the web and found your site and the price was more then reasonable. Ordered it and within the hour had the manual and within 15 minutes had the unit fixed. Best $4.99 I ever spent. Thank you.
Doug
;
This is a service manual in every sense of the word ( French and German versions of the text are included, as well as English..)
There are explanations of the mechanical and electrical functions, plenty of mechanical drawings, and the needed schematics. The quality of the scanning is excellent - all the component values are clearly legible - and very usefully there are pcb component layouts, so you can find a component on the schematic, and then very quicky pinpoint its physical location on the relevant pcb.
I cannot see how I can give this manual any less than the maximum 5 stars! Great value for money, which will pay for itself immediately. Excellent all round!
;
the manual is great and especially hard to find... thanks for the great service and having a hard to find manuel_
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.50 of store credit for Your review.
;
hat alles sehr gut geklappt. Das Servicemaual ist gut zu verwenden. Die Pläne und Schrift
ist klar und leserlich. Außerdem preiswert. Grüße an alle Hifi-Bastler
TROUBLESHOOTING COPY QUALITY TROUBLESHOOTING
May 29th, 1995
6.1.3. Dirty Background
H516T507.wmf
H516T512.wmf
Possible Cause (Scanner) � Scanner shading correction error or wrong threshold. Action: 1. Clean the shading plate. 2. Adjust the scanner contrast threshold settings. Possible Cause (Printer) � Poor drum sensitivity. � The charge is not properly applied. � The hot roller is dirty. Action: 1. Try replacing the drum. 2. Check if the hot roller surface is dirty or not. � If it is, clean the roller or replace the cleaning pad. � If not, go to step 3. 3. Check if all the charge bias terminals on the development unit and the CTM, and the charge wire are properly connected or not. � If they are, check or replace the power pack. � If not, fix the connections.
6-4
|
|
|
> |
|
