|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good copy, clear and has all necessary information. Very happy with the purchase
 ;
buen manual con sus formas de onda y esquemas , completo y de buena calidad de imagen, es correcto.
;
This is exactly what I needed This was a hard one to find and I had already downloaded several for other Panasonic radios but none matched my radio.
Although my radio is the LBE model the LBS is the same.
A very good quality manual with every thing you should get in it
;
el manual es correcto , completo y de buena calidad aunque algun esquema esta excesivamente diseccionado.
;
muy buen manual con multiples graficos y formas de onda ademas de muy completo y bien presentado.
PCBs
31 March, 1997
6.2 PCBS
6.2.1 FCU AND NCU
[C] [B]
[D] [E]
[A]
[C]
H905R510.cdr
[F]
H905R511.cdr
1. Open the top cover, gently slide the print head carriage [A] to the left end, remove the cable supporter [B], and release the flat cables [C] from the hooks (refer to section 1.2). 2. Gently slide the carriage [A] halfway across, and put the flat cables [C] inside the opening [D]. 3. Place the machine as shown, and remove the bottom cover assembly [E] (13 harnesses; do not disconnect the one connecting the FCU and the NCU, 4 screws; 2 screws at the machine�s front are short, the others are long) [E]. 4. Remove the paper tray [F] from the bottom cover assembly. 5. Remove the FCU (4 screws, 1 harness) and the NCU (3 screws, 1 harness). NOTE: When replacing the FCU, make sure to turn on the battery switch (JP1) before assembly [See the next page].
6-6
|
|
|
> |
|
