|
There are currently no product reviews.
 ;
Easy to access. Clear instructions. No problems. Printed fine.
 ;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Removing
the oven bottom
The panel in the oven bottom can be removed for cleaning or to light the burner pilot.
Burn Hazard Make sure all parts are cool before removing. Failure to do so could result in burns.
To remove:
1. Remove oven racks. 2. Remove the two hold-down screws at the rear of the oven. If screws are too tight to remove by hand, use a screwdriver.
3. Place fingers in slots in bottom panel and lift rear of panel up and back until lip at the front of panel is clear of front frame of oven cavity. 4. Lift bottom up and out.
To replace:
1. Place oven bottom panel in oven with the back raised about 6 inches or until you can insert the hold-down lip at front of panel under the front frame of oven cavity. 2. Push back of oven bottom panel down fully into place on metal flanges on rear wall and insert the hold-down screws.
21
|
