|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
 ;
Perfect source for service manuals: fast and professional transaction; high quality, perfect readable and largely scaleable PDF; complete schemes, diagrams and spare part list. Tnx a lot, cu again!!!!
;
I got your link from a friend and I must say that I am really satisfied with your service. Specially this B&O manual I didn't find anywhere on the web... but you could deliver it :-) . You deliver very fast and the copy is of good quality. So your webpage is bookmarked. Thanks
;
This was the Sony CCU-500A Service manual I was looking for.
The price was reasonable.
The permission to download was quck.
I will use Owner-Manual.com for all my manual needs.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
1
2
3
4
A
- Removing the Grille Assy (Fig.2-1,2-2) Use a pair of tweezers or something like that. Insert the tips into the bottom panel holes and slide the rail in the direction indicated by an arrow in Fig.2-1 until the grille moves down to the bottom. (Fig.2-1)
Panel Assy Grille Assy
4
1
Remove the two screws.
Disconnect the connector and then remove the Grille Assy.
B
Holes
- Removing the Panel Assy (Fig.2-2)
2 3 4
C
Remove the two screws.
3
Remove the two screws.
Release the two latches and then remove the Panel Assy.
Fig.2-1
1
2
*) When installing the Grille Assy, please make sure that the Spring is also installed. - Removing the Chassis Unit (Fig.3)
Spring
Fig.2-2
Cover
1 2
D
Remove the two screws.
Remove the four screws and then remove the Heat Sink. Remove the four screws and then remove the Chassis Unit.
3 3
4
4
Heat Sink
2 2 1 4 1
E
2 2
4
4
Chassis Unit
- Removing the Cover (Fig.3)
F
Fig.3
3
62 1
Remove the two screws and then remove the Cover.
FH-P6200/XN/ES
2
3
4
|
|
|
> |
|
