ZANUSSI FL608
Owner's Manual

Use
Control panel
FL 608

B 60°- 90° B 30°- 60° C 30°- 40° A 60°- 90° D F G

J 30°- 60° K 30°- 40° L 30°- 40° M 30°- 40° H 30°- 60° N P Q

ZANUSSIQUALITY

1

23 4 56 7

8

9

1 Detergent dispenser Drawer 2 On/Off button
Press this button to start the machine. The same button is used to switch the machine off. Before selecting a programme or changing an ongoing programme the machine must be switched off by depressing the On/Off button.

6 Half load button
Select this button to reduce water consumption on the rinse cycle when washing a half load of cottons or linens.

7 Rinse hold (anti-crease) button
By depressing this button the water of the last rinse is not emptied out to avoid any creasing in the laundry. To drain water and spin, depress button again. To drain only, select programme Q.

3 Mains-on light
It comes on when the machine starts operating and goes out by depressing ON/OFF button to switch the machine off.

8 Temperature selector dial
To select the washing temperature turn the dial to the required value. When your laundry is only lightly soiled, a cold wash can be used (dial to position ).

4 No Spin button
By depressing this button all the spinning phases are suppressed. To be used for extremely delicate items.

5 Intensive rinse button
Can be used only for cotton programmes A-B-C-D. The machine will perform the rinses with more water. This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

9 Programme selector dial
To select the required washing programme turn the dial clockwise.

23