The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Text excerpt from page 13 (click to view)
i
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door by depressing button . Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out a prewash, pour detergent into the appropriate compartment marked .
C0005
3. Measure out the additive
If required, pour fabric softener into the compartment marked without exceeding the «MAX» mark.
C0004
4. Select the desired option(s)
Depress the required button(s).
60
5. Select the temperature
Turn the selector dial to the required temperature setting.
M0027