This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 16 (click to view)
MAINTENANCE
Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply.
External cleaning
Clean the exterior cabinet of the appliance with neutral soap and water only, and then try thoroughly.
Cleaning the dispenser drawer and the recess
Pull the drawer to remove (slightly at first till the stop, then pull hard). Flush well under a fast running tab. Clean the recess with a small brush. Replace the drawer.
AL020
P0185
The dangers of freezing
If the machine is exposed to temperatures below 0°C, certain precautions should be taken. Turn off the water tap and unscrew the inlet hose. Select a wash program and run for a few seconds. Position the end of the drain hose in a bowl on the floor. Run the draining program for a few seconds. This way you make sure now water at all remains in the appliance which could freeze and thus damage it and its surroundings. When you need to start the machine up again, make sure that the room temperature is above 0°C.
