|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
FO-4450U/FO-CS1
8Secure the plates with screws as shown. Use 6 mm screws for the
holes marked with �A�, and 10 mm screws for the holds marked with ��P�. Secure the screws in the order indicated by the numbers.
GAttach the support plate to the left side of the machine, inserting the
top edges of the plate under the machine housing. Make sure that the guides fit into the holes as shown. Secure the plate with screws as shown. Use 6 mm screws for the holes marked with �A�, and 10 mm screws for the holes marked with �P�. Secure the screws in the order indicated by the numbers. (Note that the top hole on the right does not require a screw.)
A4
A3
A3 P3
A4
A4 P4
A2
A1
H Attach the shorter cassette cover totop, thenside of the cassette, inthe left serting the tabs into the holes (first bottom).
9Replace the right side cover on the machine, inserting the tabs into
the holes. Attach the longer cassette cover to the right side of the cassette, inserting the tabs into the holes (first top, then bottom).
1
1
ISecure the cassette cover with two 10 mm screws.
2
2
FReplace the screws in the side cover on the machine.
Secure the cassette cover with two 10 mm screws.
P
P
J Replace the rear cover (replace the screw under the small cover on
the left side of the rear cover first, and then replace the small cover).
A
A A P
A
A P
P
A
P
A
1 � 10
|
|
|
> |
|
