|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was exactly what I needed, Good quality scans too. superb.
;
I am so happy found this site as it consists of so many Manuls and easy to aquire. This onei s exactly what I wanted and much more as it has info on not only how to use the tuner but how to repair it as well. I will come here 1st before purchasing else where! Thanks owner-manual.com!
;
Top class product, I printed it out on A3 paper and it is clear and very easy to follow.
Cheaper than buying a new radio!
;
is part of the manual is very useful for repairing
Here are circuit diagrams
if there is damage, I recommend using this part of the
a complete list of circuit boards and components
 ;
Hello.
This paper enable me, to bring this lovley Scope into Function.
Without this Page, i have no cance to make this finish.
Hans M. Knoll Germany
5. PICTURE ADJUSTMENTS
5-1. SUB-BRIGHTNESS ADJUSTMENT 1) Pattern : PAL B/G Retma 2) Press the key to set the "STANDARD" mode. 3) Choose the "DP" using the � UP� � DOWN�keys. PR , PR 4) Check the Color 34step, the Tint 32step. 5) Maximize the Contrast. 6) Adjust the Brightness so that the second line of top appears , as follow.
2nd line
5-2. PIP SUB VIDEO LEVEL ADJUSTMENT 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set the "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to PP01 of "Sub Video out". 5) Turn the RP14 of PIP PCB to make the voltage to be 1Vp-p. 6) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode. 5-3. PIP Y, U, V LEVEL ADJUSTMENT" 1) Pattern : PAL B/G Color Bar 2) Press the � S11�key of Service Remocon to set "2-Picture" mode. 3) Press the � SERVICE�key of Service Remocon to cancel the "MENU" mode. 4) Connect the probe of Oscilloscope to "Y out" of PP02. 5) Adjust the RP11 to make the voltage of Main Y coincide with the Sub Y. 6) Connect the probe of Oscilloscope to of "U out" of PP02. 7) Adjust the RP13 to make the voltage of Main U coincide with the Sub U. 8) Connect the probe of Oscillocope to "V out" of PP02. 9) Adjust the RP12 to make the voltage of Main V coincide with the Sub V. 10) Press the � S11�key of Service Remocon twice to cancel the "2-Picture" mode.
- 10 -
|
|
|
> |
|
