ROLAND FP-7
Owner's Manual

Recording

3.

Press the button of the track you want to record, so the button is blinking.
This setting lets you record while listening to the selected song.
Track buttons Blinking Description The performance will be recorded. If performance data already exists, the existing performance will be erased and replaced as the new recording proceeds. The performance will not be recorded. During recording, the performance located at this track button will play back. The performance will not be recorded. This track does not contain performance data.

Lit Unlit

The [Rec] button will light, the [Play] button will blink, and the instrument will enter recording standby mode. If you decide not to record, press the [Rec] button once again.

Starting Recording

4.

Press the [Play] button.
After two measures of count sound, recording begins. Recording starts when you start playing the keyboard (without pressing the [Play] button). In this case, a count is not sounded. When recording begins, the [Rec] button and [Play] button will light. During the count-in, the count measure is indicated in the display as �-2� then �-1.�

Stopping Recording

5.

Press the [Play] button.
Recording will stop.
NOTE

If you record without erasing the existing song, the song tempo, time signature, and metronome settings will remain as they were for the first recording.

Listening to the Recorded Performance

6. 7. 8.

Press the [-] button to return to the beginning of the song you recorded. Press the [Play] button.
The recorded performance will play back.

Press the [Play] button once again to stop playback.
NOTE

The recorded performance will disappear when you turn off the power. If you want to keep the performance you recorded, you must save it in internal memory or on USB memory. Refer to �Saving the Songs You Record� (p. 105).

101