|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
DSC programming
CLK (Clock)
Use this menu to adjust the clock settings. SYNC The time is synchronised automatically with the RDS-CT signal. This synchronisation function can be switched off when you want to display a different time or when the RDS-CT and DCF77 time signals (atomic clock) are not strong enough. Use the rocker switch / to select the type of synchronisation: SET The time is set automatically when the audio system is tuned into an RDS station with the �CT� (clocktime) function. If this signal is not available, it is possible to adjust the clock with �SET�. - RDS Sync - DCF Sync - AutoSync - Sync off Use << on the rocker switch to switch synchronisation off (�Sync off�). Use >> to return to the previous mode. RDS Sync The clock is synchronised with the RDS-CT signal only. DCF Sync The time will flash in the top line of the display in 12 (a.m./p.m.) or 24-hour mode. Use << />> to select the value you want to adjust (hours/minutes), use / to adjust the value. The clock is synchronised with the DCF-77 signal only. When you switch off the audio system (by pressing ON for approx. 1 sec.), the system will not switch off immediately in order to synchronise the time first. While this process is taking place, you will hear �Big Ben�. After the synchronisation has been completed, the system will switch off after a couple of minutes. If the DCF-77 signal is not available, the system will switch off after a few seconds. AutoSync The clock is synchronised with the RDS-CT signal or the DCF-77 signal. The system will not attempt to receive the DCF-77 signal unless the time cannot be synchronised with the RDS-CT signal. Sync off The internal clock will not be synchronised. MODE Select the clock display. (12h mode << />> 24h mode). If you select the 12h mode, a.m. will appear to indicate the morning hours and p.m. for the afternoon/evening. VIEW (Displaying the time) There are a number of different display modes, depending on how the audio system has been connected. a) the audio system can be switched off with the ignition. The system is switched off with �ON� when the ignition is switched on. 95
PORTUGU�S ESPA�OL SVENSKA NEDERLANDS ITALIANO FRAN�AIS ENGLISH DEUTSCH
|
|
|
> |
|
