|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
FS-J60
2.1.4 Removing the tuner board (See Fig.7) � Prior to performing the following procedure, remove the metal cover. (1) Disconnect the card wire from the connector CN1 on the tuner board. (2) Remove the two screws F on the rear side and the screw G in the side.
G
F
Tuner board CN1 Fig.7
2.1.5 Removing the CD-R/RW mechanism assembly (See Fig.8) � Prior to performing the following procedure, remove the metal cover, the rear cover, the rear panel and the tuner board. (1) Disconnect the card wire from the connector CN903, CN902 and CN904 on the main board. (2) Pull the joint d in the direction of the arrow and remove the CD-R/RW mechanism assembly backward while releasing the joint e .
CD-R/RW mechanism assembly
d d
e CN903 CN904 Main board CN902
Fig.8
(No.22052)1-7
|
|
|
> |
|
