|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
(2) Indication of the auto adjusting value (CD test mode 2)
While pressing both the STOP and AHB plus buttons on the main unit, turn on the primary power supply.
Press the STANDBY/ON button on the main unit. FL indication CD TEST MODE 1 Wait a moment while keeping to press the SET key on the remote controller. FL indication CD TEST MODE 2 Press the SET key on the remote controller. FL indication : : Adjusting value Each time the SET key on the remote controller is pressed, the indication changes from FG to AOC1.
Description of the indication
FG Mantissa part of the focus gain FEXP Characteristic part of the focus gain E2 status FBAL Adjusting value of the focus balance FOFS Adjusting value of the focus offset FES TG TEXP E3 status TBAL Disturbance amplitude during the focus gain adjustment Mantissa part of the tracking gain Characteristic part of the tracking gain Tracking balance adjusting value
TOFS Tracking offset adjusting value TES Disturbance amplitude during the tracking gain adjustment FAGC Focus precise gain ABC2 Tracking balance E1 status ABC1 AGC2 AGC1 AOC1 Focus balance Tracking coarse gain Focus coarse gain Focus offset
Press the CANCEL key on the remote controller. FL indication CD TEST MODE 1
(3) Cancellation of the test mode To cancel the test mode, press the STANDBY/ON button on the main unit. 1-18 (No.MB044)
|
|
|
> |
|
