|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
April 8, 1998
COPY QUALITY ADJUSTMENT
PARALLELOGRAM IMAGE ADJUSTMENT
The 1st and 2nd scanners are mounted perpendicular to the scanner rod in the factory. If they are not mounted perpendicular, a parallelogram image may appear. Since they cannot be reinstalled in the field correctly, the mounting screws must not be removed. The 4th and 5th mirror units have an adjustment screw on the bracket that can change the angle to the lens. If this angle is not correct, a parallelogram image also appears. This position is adjusted in the factory, however, it can be changed in the field by the following procedure if necessary. There is no need to adjust this screw position under normal usage conditions. The parallelogram image caused by the incorrect 1st and 2nd scanner mounting angle cannot be fixed by this adjustment.
Adjustment Tool:
OS-A4 Test Chart
179
|
|
|
> |
|
