|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
August 1, 1985
Lower Clamshell
(1) Front Cover (2 screws) 1. Open the clamshell to remove the
2. screws. Pull out the cassette holder to remove the front cover.
(5) Lower Left Cover (2 screws) 1. Remove the front cover (2 screws), the upper rear cover (2 screws), and lower rear cover (4 screws) to remove the lower left cover. (6) Exit Cover (2 screws)
NOTE: * When installing the front cover, be sure that the tabs engage with the positioning notches. (2) Manual Feed Guide 1. Open the clamshell. 2. Lift the manual feed guide and remove. (3) Lower Right Cover (2 screws) (4) Lower Rear Cover (4 screws) 1. Remove the upper rear cover (2 screws). 2. Open the clamshell and remove. NOTE: * Remember that one screw is longer than the other three screws. The longer screw prevents the upper paper feed guide plate from being turned over.
5-3
|
|
|
> |
|
