|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual for Sony LBT-D505 component stereo system is was excellent , with schematics, parts layout and parts list as well as instructions for adjustments for each component. Print was clear even when enlarged.
;
It's exactly a complete and very useful manual with all details what I needed. Thank you!I will come back whenever I need your manuals or schematics.
;
I searched EVERYWHERE looking for the manual/s on this "extinct" amp. Owner-Manuals.com made it available and for nearly nothing. Thanx to them, I can decipher the unknown cables and sort them out. Thanx, Owner-Manuals.com!!
;
Yes thank you i got the file i was after. There was a slight problem in my communication but it all worked out well.
A job well done.
 ;
Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
1 December 1990
4.7 ENTRANCE SEAL REPLACEMENT
[A] [B]
[C] [I]
[H]
2.5mm
[F] [G]
[D]
� �
[E]
1. Remove the cleaning unit and the following parts: Cleaning Blade Cleaning Brush 2. Remove the used toner. (See Used Toner Collection.) 3. Clean the cleaning unit with a vaccum cleaner.
4. Remove the entrance seal [A] together with the strip of 2-sided tape securing it to the lower casing. 5. Clean the lower casing [B] with alcohol; make sure that no tape remains on the casing surface. 6. Place a new strip of 2-sided tape [C] on the lower casing surface. The lower edge [D] of the tape must be flush with the edge [E] of the projection as shown in the illustration. 7. Place the new entrance seal on the 2-sided tape. Extend the seal so that both edges [F] align with the edges [G] of the tape. NOTE: a) The lower edge [H] of the entrance seal must be aligned with the edge [E] of the projection on the lower casing. b) Make sure that there are no waves in the upper edge [I] of the entrance seal.
5-42
|
|
|
> |
|
