I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Text excerpt from page 154 (click to view)
12 February 1992
COPIER INSTALLATION
[C]
[B]
[C]
[A]
[D]
Installation
[E]
[F]
11. Push the development unit lock lever [A] to the right (to the lock position). 12. Move the development release lever [B] to the right and pull out the black development unit [C] half way. Holding the toner supply unit [D] with your right hand and the bottom of the development unit with your left hand, pull the unit all the way out . Place the unit on a clean sheet of paper. 13. Separate the toner supply unit from the development unit (3 screws). 14. Pour one pack of black developer [E] into the development unit while turning the development roller knob [F] counterclockwise. This will distribute the developer inside the unit. 15. Remount the toner supply unit on the development unit.