|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
;
A good service manual with lots of info and a very fair price
;
Great value, good scan, just as expected, everything that you need.
;
Good scan, great price, but almost the same with the SV260 service manual.
DUPLEX UNIT
8 July 1996
[E]
[F]
[D]
[G]
A176R515.wmf
[A]
[I] [C]
[B]
A176R719.wmf
[H]
A176R700.wmf
NOTE: 1) Adjust the position of the stopper [A] so that the jogger fences [B] and side plate [C] are parrallel. 2) When installing the jogger fences, confirm if the two positioning pins [D] are correctly set in the two holes on the side fences after the screw is set. 3) When installing the positioning roller assembly, insert the plate [E] in the hole [F] on the rear frame, then set the plate on the lever [G]. 4) When installing the rear paper press mylar, set the hook [H] to the rear jogger fence [I] as shown so that the mylar moves together with the jogger fence [I]. 5) After installing the jogger fences, manually move the jogger fences [I] to confirm that they move smoothly. 6) After re-assembling the duplex unit, manually pull the plungers of the positioning roller solenoid and the pressure arm solenoid to confirm that the positioning roller assembly and the pressure arm move up and down correctly. 7) After re-assembling the duplex unit, adjust the jogger fence width so that the distance between both side fences become 1 mm wider than the paper size, when paper is set on the duplex tray. ( SP Adjustment - PAGE 10.)
5-116
|
|
|
> |
|
