|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
2. The bell does not ring & page does not ring.
Can the base and handset be connected? OK Press handset DIAL key while in TALK MODE. Can key touch sound be heard from the ring? OK When the key of the handset is pressed, can the pulse output at pin 58 of IC603 be seen? OK At the Q606 collector, can the pulse wave be seen? OK Check RINGER Y601. NG Check R627,R629,R667, Q605,Q606, and Q613. NG See 3. The base and handset cannot be connected.
NG
NG
Check IC603.
When the PAGE SW S1 of the base is pressed, does pin19 of IC5 change from high to low?
NG
Check R40, R42 and S1.
Check IC5 and its peripheral circuit.
|
|
|
> |
|
