perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 17 (click to view)
Preparations
� Setting TV Shape IMPORTANT! � Make sure you have completed all the necessary connections. (See Connections � Connecting TV set) Select the aspect ratio of the TV to be connected. 4:3 PS (Pan and Scan mode ) � If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.
Step 3: Setting video preference
Turn on the TV set and set it to the correct Video-In channel. � You may go to channel 1 on your TV set, then press the channel button repeatedly until you see the Video In channel. � Or, you can use the TV remote control to select different video modes. � Or, set TV to channel 3 or 4 if you are using an RF modulator.
Language Video Audio Rating
4:3 LB (Letterbox mode ) � If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. A wide picture with bands displayed on the upper and lower portions of the TV screen.
TV Shape TV System Video out
4:3 LB Auto
S-VIDEO
4:3 PS 4:3 LB
16:9
1 2
In the disc mode, stop playback and press SET UP. Press 1/2/5/4 on the remote control to toggle through the functions and select your preferential option. � Move to Video and press OK or 4. � Move to one of the following and press OK.
16:9 (Wide screen mode) � If you have a widescreen TV set, use this setting (you must also set your widescreen TV to �full size�) available on a disc, then the disc�s own preference will be used.
Note: The format you select must be available on the disc. If it is not, the setting for TV Shape will not affect the picture during playback.