This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 16 (click to view)
16
With the SOUND 3 or 4 controls, you can change the level of any DSC setting except CLASSIC. � First select the DSC feature, then press the SOUND 3 or 4 until the desired digital sound setting level is reached. � The digital sound setting level will increase or decrease between level 1 and 5. Note: � For neutral setting, select CLASSIC and switch off DBB. DYNAMIC BASS BOOST (DBB) There are three DBB settings to enhance the bass response. � Press DBB briefly to select a bass boost level. � The respective DBB level is being encircled and lit. � �BEAT�, �PUNCH� or �BLAST� will be displayed. To switch off DBB � Press DBB briefly until �DBB OFF� is displayed. Note: � Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
OPERATING THE SYSTEM
Automatic DSC-DBB selection The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. MUTE (on remote control only) This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence. � Press MUTE on the remote control to switch off the sound. � �MUTE� will be displayed. � Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.
