|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
CLOCK
5 Press CLOCK/TIMER again to store the setting. � The clock starts. � To exit without storing the setting, press � on the system.
TIMER
� The system can switch on to VCD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode. 1 Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode. � � AM 12:00� or �00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. � The TIMER starts flashing. � The selected source is lit while other available sources are flashing. 2 Press VCD, TUNER or TAPE to select the desired source. � Before selecting VCD or TAPE, make sure a disc or tape is loaded in the disc tray or tape deck 2. 3 Press à or á on the system to set the hour for the timer to start. 4 Press à or ë on the system to set the minute for the timer to start.
Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When a power interruption occurs, the clock setting is erased.
Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is VCD, playback will begin with the first track of the disc tray 1 or other trays if disc tray 1 is empty. If all the disc trays are empty, the TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � The timer will not activate if a recording is in progress.
To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press CLOCK/TIMER again to store the start time. � The timer is now on. � The TIMER appears on the display.
pg 01-28/V55/21-En
25
6/8/01, 9:12 AM
3139 115 20042
English
25
Timer Setting
5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. � At the preset time, the timer will be activated. � The selected source will be played.
To switch off the TIMER 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "OFF" and the TIMER disappears.
|
|
|
> |
|