|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
Set Up for Esoteric Units
4 Select 44.1kHz using the FREQUENCY MODE button.
2
3
4
5
5 Select the frequency of the word clock for each line by
pressing the A, B or C button. This is the recommended set up for synchronization with TEAC-ESOTERIC CD units: P-70, X-01, UX-1, P-01, D-01 < Set the frequency as high as the connected units will allow for synchronization. P-70: 88.2 kHz X-01: 176.4 kHz P-01: 176.4 kHz D-01: 176.4 kHz
1 Connect WORD CLOCK OUT terminals to WORD SYNC IN
terminals of each unit using commercially available BNC coaxial cables. P-70: turn ON the WORD SYNC IN switch (front panel), then set the PLL filter switch (back panel) to �MODE2�. X-01: select �Word M1 ON� using the CLOCK MODE button. UX-1: select �Word ON� using the CLOCK MODE button. P-01: select �Rb IN� using the WORD button. D-01: select �Rb IN� using the WORD button.
NOTE: If you connect this unit to other manufacturers units, be sure to read the manuals of those devices to confirm the frequency range of synchronization. Dual AES connection will require you to set the clock frequency at one half of the audio signal frequency.
2 Press the STANDBY/ON button to turn the unit on.
The standby indicator will turn off.
3 Press the MASTER button to select which oscillator you
will use for the reference frequency.
< �Rb� is recommended.
8
|
|
|
> |
|
