|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
 ;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
;
Wow very wonderful and clear!!!! I will always trust them
70GS-61S
Corner Symmetry Adjust the Corner Symmetry so that the picture is centred. The effect of this adjustment is shown in figure 7. Note: This adjustment affects to upper and lower sides. � When the volume up button is pressed, side pincushion changes from pincushion to barrel shape. � When the volume down button is pressed, side pincushion changes from pincushion to barrel shape. � Press the stand-by button on the remote control to store.
Fig.7
Vertical Linearity Adjust the Vertical Linearity so that the upper and lower parts of the picture are symmetrical. The effect of this adjustment is shown in figure 8. � When the volume up button is pressed, the upper picture scanning decreases and the lower picture scanning increases. � When the volume down button is pressed, the upper picture scanning increases and the lower picture scanning decreases. � Press the stand-by button on the remote control to store.
Fig.8
Vertical Angle Adjust the Vertical Amplitude so that the picture is centred. The effect of this adjustment is shown in figure 9 � When the volume up button is pressed, the vertical angle changes to right. � When the volume down button is pressed, the vertical angle changes to left. � Press the stand-by button on the remote control to store.
Fig.9
Vertical Bow Adjust the Vertical Bow so that the picture is centred. The effect of this adjustment is shown in figure 10 � When the volume up button is pressed, the vertical bow changes to right. � When the volume down button is pressed, the vertical bow changes to left. � Press the stand-by button on the remote control to store.
Fig.10
Vertical Amplitude Adjust the Vertical Amplitude so that the picture is over-scanned. The effect of this adjustment is shown in figure 11. � When the volume up button is pressed, the vertical size of the picture decreases. � When the volume down button is pressed, the vertical size of the picture increases. � Press the stand-by button on the remote control to store. Fig.11
S Correction Adjust the S Correction so that the picture symmetrical between the top, centre and bottom. The effect of this adjustment is shown in figure 12. � When the volume up button is pressed, the top and bottom scanning increases and the centre scanning decreases.
Fig.12
9
|
|
|
> |
|
