I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
Text excerpt from page 8 (click to view)
Wasserenthärter einstellen
3 Um Kalkablagerungen auf Geschirr und im
Geschirrspüler zu verhindern, muss das Geschirr mit weichem, d.h. kalkarmem Wasser gespült werden. Der Wasserenthärter muss gemä� Tabelle auf die Wasserhärte Ihres Wohngebietes eingestellt werden. Auskunft über die örtliche Wasserhärte erteilt das zuständige Wasserwerk. leuchtet
Die LED-Anzeigen der Funktions-Tasten 1 bis 3 blinken. 3. Funktions-Taste 1 drücken. Die LED-Anzeige der Funktions-Taste 1 blinkt. Gleichzeitig blinkt die LED-Anzeige 3in1 : � Die Anzahl der Blinkzeichen der LED-Anzeige 3in1 entspricht der eingestellten Härtestufe. � Diese Blinkzeichenfolge wird nach jeweils 3 Sekunden Pause mehrmals wiederholt. 4. Drücken der Funktions-Taste 1 erhöht die Härtestufe um 1. (Ausnahme: Nach Härtestufe 10 folgt Härtestufe 1). 5. Ist die Härtestufe richtig eingestellt, EIN/AUS-Taste drücken. Die Härtestufe ist dann gespeichert. Wird der Wasserenthärter elektronisch auf �1� eingestellt, dann wird damit die Kontroll-Anzeige für Spezialsalz abgeschaltet.
3 Falls
1. EIN/AUS-Taste drücken. Die LED-Anzeige Programmende
Anzeigen zusätzlich leuchten, ist ein Spülprogramm aktiviert. Das Spülprogramm muss abgewählt werden: Funktionstasten 2 und 3 für ca. 2 Sekunden
gleichzeitig drücken. Alle zusätzlichen Anzeigen erlöschen. 2. Funktions-Taste 2 und 3 gleichzeitig drücken und gedrückt halten. Wasserhärte in °fh1)) 90 - max. 125 76 - 89 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 07 - 18 unter 7 in °dh2)) 51 - max. 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 unter 4 IV Bereich
Einstellung der Härtestufe 103) 9 8 7 6 5 4* 3 2 1 kein Salz erforderlich
Anzahl der Blinkzeichen 10 9 8 7 6 5 4 3 2 1
III II I/II I
1) (°fh) französischer Grad, Ma� für die Wasserhärte 2) (°dh) deutscher Grad, Ma� für die Wasserhärte 3) Bei dieser Einstellung kann sich die Programmlaufzeit geringfügig verlängern. *) werkseitige Einstellung