|
Who's Online
There currently are 5742 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
[Back] [Next]
Customized Shooting (CAMERA MODE)
(1) Zooming This mode allows you to zoom up on your subject, making it appear larger (maximum 2X) and closer. Note that the digital zoom function is only available when the LCD monitor is ON. The resolution is automatically set at VGA (640 x 480 pixels) upon activating the zoom function.
Procedures: 1. Ensure that the camera is turned on. 2. Select the Camera mode with the MODE button. 3. Ensure that the LCD monitor is activated. (Toggle the LCD/OK button to activate/deactivate it). 4. Press the 2x/ button to activate the digital zoom function. The image on the LCD monitor will be enlarged. 5. To deactivate the digital zoom function, press the same button again. 6. Frame your subject. Then, press the shutter button fully down. (For details, see �Shooting Basics�) (2) Using Flash The flash is designed to fire automatically when required. (Default setting : AUTO). To suit the different conditions, however, you can change the flash mode. Press the flash button until the desired flash mode (AUTO, RED-EYE REDUCTION, FILL-IN, OFF) is indicated by the cursor.
Procedures 1. Ensure that the camera is turned on. 2. Select the Camera mode with the MODE button. 3. Press the flash button until the desired flash mode (AUTO, RED-EYE REDUCTION, FILL-IN, OFF) is indicated by the 4. Frame your subject. Then press the shutter button fully down. (For details, see �Shooting Basics�) AUTO Flash Red-Eye Reduction (RER) Fill-In Flash Flash Off
cursor.
The flash fires automatically according to the photography conditions. It is suitable for general photography. Use this mode to avoid the red-eye effect when photographing people or animals in low light conditions.
The flash fires regardless of the surrounding brightness. It is suitable for photographing in artificial light (backlighting, fluorescent lighting, etc.). Used where the use of flash is prohibited or when utilizing the night view/indoor lighting for shooting. The flash can also be turned off when the distance to the subject is too far away for the flash to have any effect.
Note:
The red-eye reduction function may have little effect if the subject is not directly facing the pre flash or main flash, or when the distance between the camera and the subject is too far. (3) Using Self-Timer With the Self Timer (10 seconds delayed shutter) function, the photographer too, can get into the frame when taking group pictures.
|
|
|
> |
|