|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
Getting Started Customizing Your Monitor
Customizing Your Monitor
Using the GEOM (Geometry) Onscreen Display
The GEOM (geometry) settings allow you to adjust the shape and orientation of the picture. Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal.
4
Press the >?// buttons to adjust the settings.
Using the ZOOM On-screen Display
The ZOOM settings allow you to enlarge or reduce the picture. Once the setting is adjusted, it will be stored in memory for the current input signal.
Using the COLOR On-screen Display
You can change the monitor�s color temperature. For example, you can adjust or change the colors of a picture on the screen to match the actual colors of the printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received.
For
ROTATION
Press
/ . . . to rotate the picture clockwise
1 1
Press the MENU button. The MENU OSD appears.
MENU
1
Press the MENU button. The MENU OSD appears.
MENU
Press the MENU button. The MENU OSD appears.
MENU
? . . . to rotate the picture counterclockwise
2
PINCUSHION
/ . . . to expand the picture sides
Press the ¨./> and >?// buttons to select � GEOM,� and press the MENU button again. The GEOMETRY OSD appears.
GEOMETRY
2
? . . . to contract the picture sides
Press the ¨./> and >?// buttons to select � ZOOM,� and press the MENU button again. The ZOOM OSD appears.
ZOOM
2
Press the ¨./> and >?// buttons to select � COLOR,� and press the MENU button again. The COLOR OSD appears.
COLOR
PIN BALANCE
/ . . . to move the picture sides to the right
EN
H V 26 73
26 ROTATION
? . . . to move the picture sides to the left
F ES
G B R G B
5000K 6500K 9300K R B I AS 50 B I AS B I AS GAIN GAIN GAIN 50 50 50 50 50
1-4
3
Press the ¨./> buttons to select the item you want to adjust. Select
ROTATION PINCUSHION PIN BALANCE KEYSTONE KEY BALANCE
3
Press the >?//buttons to adjust the picture zoom.
3
KEYSTONE
/ . . . to increase the picture width at the top
Press the >?// buttons to select the color temperature.
C
/ . . . to enlarge the picture ? . . . to reduce the picture
? . . . to decrease the picture width at the top
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To
adjust the picture rotation adjust the picture sides adjust the picture side balance adjust the picture width adjust the picture shape balance KEY BALANCE / . . . to move the top of the picture to the right
To reset, press the RESET button while the OSD is on. Note
There are three color temperature modes in the OSD. The preset adjustments are: 5000K, 6500K, 9300K
? . . . to move the top of the picture to the left
The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value.
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To reset, press the RESET button while the OSD is on. The selected item is reset to the factory setting.
11
12
|
|
|
> |
|
